505.473.7366  |  EMAIL

VACUUM TOILET TEST STAND (VTTS) FOR LUFTFAHRTGERATE GAUTING GMBH (LGG) J540Al1-500/-520 AND J540Al2-500/-520 TOILETS

Our Part Number: TP949

This TP949 Vacuum Toilet Test Stand (VTTS) is used for bench testing, troubleshooting, repair and calibration of Airbus A330 AND A340, Toilet Assembly , P/N J540Al1-500/-520 AND J540Al2-500-520 Series, as manufactured by LUFTFAHRTGERATE GAUTING GMBH (LGG) , as specified in ATA 38-32-42 Available in 115VAC or 220VAC, 50 or 60 Hz configurations.

The VTTS provides operators with full capability for functional testing of LUFTFAHRTGERATE GAUTING GMBH (LGG ) toilet assemblies. The VTTS uses electrical power, pneumatic air, and supply water to simulate conditions required for bench testing and overhauling toilet assemblies. The VTTS provides the toilet assembly with a regulated DC power source, regulated pressurized water source, and a regulated vacuum source. Electrical harness is supplied to provide the necessary interface. Connections for MICBAC, RS232C and RS485 interface also provided. Water harness provided for interface to toilet assembly Rinse Valve assembly.

Stainless-steel (aircraft grade) fittings and stainless-steel tubing (aircraft grade) used throughout. All panel meters back-lighted and available with NIST certifications and data sheets. All gages are 1% accuracy and available with NIST calibration certificates and data sheets. Mil-spec grade electrical connectors used throughout.

End user to supply inlet water (50-60 psi) to a 1/2" NPT female fitting. Other water inlet fitting sizes available upon request.
End user to supply air pressure minimum of 130 psig, to a 1/2" NPT fitting. Other air inlet fitting sizes available upon request.
End user to supply external PC computer for MICBAC interface.

Electrical Panel markings (switches, valve handles, meters, etc) available in multiple languages of your choice for additional fee. Inquire at time of order.

Optional "Certificate of Conformance" is available as industry accepted "proof" of equivalency for FAA/EASA inspector review, if needed. Request this at time of order. See example of "Certificate of Conformance" here:

See also TP951 for the associated Flush Control Unit (FCU) Test Panel, which allows for testing, repair and troubleshooting of FCU P/N FCU9811-01 and FCU9816 as referenced in ATA 38-32-73. This is a separate item and not included with the VTTS TP949.

World-wide shipping.

Approximate Lead-Time:
120 days ARO

Dimensions:
Tester Table
Height: 40.5"
Width: 25"
Length: 72"

Power Requirements:
115VAC @ 50 or 60Hz
220VAC @ 50 or 60Hz

DON'T SEE WHAT YOU NEED?
CONTACT US AND WE WILL BUILD IT.

Santa Fe Aerospace
Airport Business Park
7501 Avenger Way, Suite D
Santa Fe, New Mexico USA near 87507
01.505.473.7366 | EMAIL